About this RC wheel set
The 1/14 truck runs a taller tyre and a wider wheel, which is part of why it is calmer at speed: more rubber in contact and more sidewall to absorb a bad surface. They arrive mounted and glued on the hex, ready to bolt on. If the car has started to tramline on a straight, check these for a flat spot before you adjust anything in the suspension.
Where it sits in the HYPER GO RC car range
The 14300E1 is part of our Wheels & Tire Sets shelf, which carries 4 parts for the MJX HYPER GO range. Model code 14300E1 is the number every listing here is keyed to: quote it and the gears, shocks, wheels and bodies that suit this chassis all line up. It is a service part rather than a vehicle, so check the fits row before you order.
Fit and compatibility
This part is listed against H14BM, 14210. Those codes are stamped on the chassis plate under the body; photographs are a poor guide at this scale, because neighbouring versions differ by a couple of millimetres and look identical. If the plate on your car is unreadable, send us a picture with the shell off and we will tell you which version you have.
Living with it
Hose the mud off before it dries and check the wheel nuts after the first run on a new set. Grit between tire and rim is what works a bead loose.
Specification
| Part code | 14300E1 |
|---|
| Contents | Two wheels with tyres |
|---|
| Supplied | Mounted and glued |
|---|
| Scale | 1/14 |
|---|
| Fits | H14BM, 14210 |
|---|
Questions about the 14300E1
- Do these arrive glued?
- Yes. Mounted to the rim, glued around the bead and with the foam insert already fitted.
- How many do I need?
- Each listing is a matched pair, so a full change on a four wheel vehicle is two of them.
- Will they fit a different HYPER GO RC car?
- Only the chassis in the fits row. Hex size and offset differ between the crawler family and the 1/14 and 1/16 trucks.