HYPER GO KS003 Screw Kit for 1/14 and 1/16 Chassis

About this screw kit

If you run more than one of our trucks, this is the bag to own: the lengths and head types across the two platforms in one box, rather than a kit per car. It is sorted by size, which sounds minor until you are matching a thread by eye under a bench light. A full rebuild should not need a trip anywhere, and with this on the shelf it does not.

Where it sits in the HYPER GO RC car range

The KS003 is part of our Screw & Hardware Kits shelf, which carries 3 parts for the MJX HYPER GO range. Model code KS003 is the number every listing here is keyed to: quote it and the gears, shocks, wheels and bodies that suit this chassis all line up. It is a service part rather than a vehicle, so check the fits row before you order.

Fit and compatibility

This part is listed against the chassis named in its title. Those codes are stamped on the chassis plate under the body; photographs are a poor guide at this scale, because neighbouring versions differ by a couple of millimetres and look identical. If the plate on your car is unreadable, send us a picture with the shell off and we will tell you which version you have.

Living with it

Press hard on the driver before you turn, and stop as soon as the screw seats. These threads run into plastic and most rounded heads are made by the tool rather than by the load.

Specification

Questions about the KS003

Which chassis do these fasteners suit?

The model codes in the fits row above. Between the three kits we cover every threaded fastener on the 1/14 and 1/16 cars.

Are the lock nuts reusable?

A few times. When a nut spins down the thread under finger pressure the nylon insert has given up and it should be replaced.

Should I buy one before I need it?

Yes, and it is the cheapest advice on this site. A rounded screw on a Sunday afternoon costs a weekend otherwise.