Pit lane / Motors, ESCs & Radio Gear / T3D
HYPER GO T3D 2.4 GHz Three-Channel Transmitter
$39.99
In stock
4.1 out of 5 · 4 ratings
A three channel transmitter on 2.4 gigahertz — steering, throttle and one spare, which is the channel that ends up on the lights.
Model code T3D. Quote it when you order a spare — our part numbers are printed on the bag.
About this brushless motor
Two channels drive a car and the third is what makes it ours: a switch for the light bar, or a second function on a chassis that has one. The grip and trigger geometry is the one we have settled on across the range, so a driver moving between our trucks is not relearning their hand. Bind it to the matching receiver on the chassis — the pairing is per receiver, not per model.
Where it sits in the HYPER GO RC car range
The T3D is part of our Motors, ESCs & Radio Gear shelf, which carries 11 parts for the MJX HYPER GO range. Model code T3D is the number every listing here is keyed to: quote it and the gears, shocks, wheels and bodies that suit this chassis all line up. It is a service part rather than a vehicle, so check the fits row before you order.
Fit and compatibility
This part is listed against the chassis named in its title. Those codes are stamped on the chassis plate under the body; photographs are a poor guide at this scale, because neighbouring versions differ by a couple of millimetres and look identical. If the plate on your car is unreadable, send us a picture with the shell off and we will tell you which version you have.
Living with it
Electronics fail hot. Blow the heatsink and the fans out after dusty sessions, keep the wires clear of the spur gear, and give the car two minutes between packs in summer.
Specification
| Part code | T3D |
|---|---|
| Band | 2.4 GHz |
| Channels | Three |
| Form | Pistol grip |
| Binding | Per receiver |
Questions about the T3D
- Will this fit my HYPER GO RC car?
- Match the model codes in the fits row above against the code stamped on your chassis plate. Brushed and brushless parts are not interchangeable in either direction.
- Does it need setting up?
- No. The 45A speed controls read the cell count when you plug a pack in and set their own cutoff. Receivers are bound with the transmitter held close to the car.
- What if the car powers up but ignores the handset?
- That is almost always a lost binding rather than a failed receiver. Rebind both units together before ordering a replacement.