HYPER GO 16200 Front Swing Set for 1/16 Chassis

About this oil filled shock

After a real impact the arm is rarely the only thing bent, and chasing it part by part costs two orders and a fortnight. This set rebuilds the whole front corner geometry in one go, which is how we do it in our own pit. It fits five chassis codes including the H16PL and the 16208. Torque the hinge pins to turn freely without play — a tight pin binds the arm and reads as a dead shock.

Where it sits in the HYPER GO RC car range

The 16200 is part of our Suspension, Shocks & Arms shelf, which carries 13 parts for the MJX HYPER GO range. Model code 16200 is the number every listing here is keyed to: quote it and the gears, shocks, wheels and bodies that suit this chassis all line up. It is a service part rather than a vehicle, so check the fits row before you order.

Fit and compatibility

This part is listed against H16GT, H16DR, H16BM, H16PL, 16208. Those codes are stamped on the chassis plate under the body; photographs are a poor guide at this scale, because neighbouring versions differ by a couple of millimetres and look identical. If the plate on your car is unreadable, send us a picture with the shell off and we will tell you which version you have.

Living with it

Replace across an axle rather than one corner at a time. A fresh shock opposite a tired one makes a car that turns differently left and right, which is harder to drive than two tired shocks.

Specification

Questions about the 16200

Which end of the car does this suit?

The fits row above lists the chassis and, where it matters, the end. Front and rear units on the 1/14 cars are different lengths.

Are these sold singly or in pairs?

As listed on the card. Shocks come in pairs so that an axle always gets matched damping; arms are sold both ways depending on the part.

My truck bounces after landings. Is this the fix?

If the shock body is wet with oil, yes. If the shaft is bent and the corner stays down, you need the unit rather than a rebuild.